All

  Rear Valance VW Golf 8 GTI Clubsport FITS:Volkswagen Golf GTI Clubsport Mk8 2020 - 2024Volkswagen Golf GTI Clubsport Mk8 Facelift 2024 - COMPLETE SET CONTAINS: -> Rear DiffuserCOLOUR:-> Gloss Black This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

APR Turbo Inlet System - EA888 Gen4 265-333ps MQB Evo Models Compatible Vehicles -Volkswagen- Golf Mk8- Audi S3 (8Y) The APR Turbo Inlet System is a comprehensive upgrade to your factory or modified intake system. To maximize performance addressing the restrictive components between the airbox and turbocharger are a top priority. It's common to individually upgrade these components, but doing so is not ideal as it mean sacrificing overall design for the sake of compatibility. This is why the APR system is one complete upgrade from the turbocharger to the intake airbox. We were able to increase the diameter as large as possible with the best geometry from the turbo to the intake airbox to promote the maximum amount of flow with the lowest pressure drop. The system starts at 80mm and can expand up to 88mm for larger airbox systems. On the Golf R we increased flow by over 30% at each measured inlet depression! This means the turbo doesn't have to work as hard, which translates to lower temperature, and improved performance. This system is compatible with the factory intake airbox, and works perfectly with an APR intake filter for those who prefer a "stealth" OE airbox upgrade. Over a 30% increase in flow, lower pressure drop, optimized performance over stock Full system addresses all restrictions between the turbocharger and airbox Wire-reinforced hose lined with fluorosilicone for oil and fuel resistance Billet DV connector Fits 80mm and 88mm airboxes Perfect upgrade for the factory airbox or upgraded “airbox only” intake systems Turbo inlet adapter is removable and can be modified for larger turbo setups

Read more less

 Spoiler Volkswagen Golf R / GTI / R-Line Hatchback Mk7 / Mk7 Facelift FITS:Volkswagen Golf R Hatchback Mk7 2013 - 2016Volkswagen Golf GTI Hatchback Mk7 2013 - 2016Volkswagen Golf R-Line Hatchback Mk7 2013 - 2016Volkswagen Golf R Hatchback Mk7 Facelift 2016 - 2020Volkswagen Golf GTI Hatchback Mk7 Facelift 2016 - 2020Volkswagen Golf R-Line Hatchback Mk7 Facelift 2016 - 2020 Item is supplied UNPAINTED and will require Test fit, prep and paint prior to install!COMPLETE SET CONTAINS:-> Spoiler Our fiberglass products are handmade. Please understand that this could mean the product requires adjustments before beginning the installation / painting process. If the product arrives with any scuff marks it will not affect the finish, as it is unpainted, and preparation needs to be completed first. Adjustments include: - Sanding – Essential - Priming – Essential - Shaping - Possible We always recommend taking such products to a professional body shop that specialises in or is familiar with fiberglass  

Read more less

Front Splitter Ford Tourneo Courier Mk2 FITS:Ford Tourneo Courier Mk2 2023 -   COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically: - Your screws will never rust - You can select any colour you want! This kit is for the MK2 Puma (All Models), and it comes in 2 options Option 1. All Metal screws in Engine bay (Circled Yellow)Contents: 14x Washer - 14x Stainless steel screw. Locations: Headlights, Bumper Slam Panel & Air Feed Option 2. All screws above, Plus 6 Additional (Circled Red)Contents: 20x Washer - 20x Stainless steel screw. Locations: Headlights, Bumper Slam Panel, Air Feed, Wings & Scuttle Panel You've seen these on eBay for £7, So why buy from us you ask... Well, The ones on eBay come with M6 screws. We can assure you that these screws will not fit in your car. Also, our washers are made from a premium grade aluminium and anodized to last, Unlike their cheap counter parts. Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

  As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Mk3 Focus ST and RS owners who want to further improve the performance and potential of their cars for track or fast road use. Direct Replacement FitDesigned to fit both the 2.0-litre ST and 2.3-litre RS models, the manifold is a true direct replacement that utilises all of the original fixtures and fittings, including the standard throttle body and therefore pipework. There are also provisions to fit either the original plastic engine cover or the AIRTEC Motorsport replacement engine cover, and the design also includes a moulded fixing tab to secure the vacuum line, as per the original. The comprehensive fitting kit includes a thermal gasket to help reduce heat transfer from the cylinder head, together with all fixtures and fittings, new rubber gaskets as well as detailed installation instructions. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black with a raised AIRTEC Motorsport logo, for a neat OEM+ look to improve the appearance of the engine bay. The design also offers improved flow compared to the original, which in-turn offers a notable increase in throttle response. Remapping is not necessary after fitting, but for optimal gains there would be a benefit.  A key feature of the manifold is its ability to allow an easy solution for extra fuelling capabilities, thanks to the four port injector bosses and fuel rail fittings. This allows additional fuel to be easily added for big power builds without having to use an inlet manifold port injector spacer. Please note: we do not currently supply a direct fit fuel rail but the option will be available in the future.  Features:  True direct replacement fit that requires no additional parts Cast aluminium construction for improved strength  Extra fuelling capabilities with port injection bosses Improved flow and increased throttle response   Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included  AIRTEC part no: ATMSFO151

Read more less

Wide Mouth / Snorkel / Big Mouth / RamAir Snorkel - MK4 / 4.5 Focus Injection moulded and manufactured from ABS, not 3D printed like others! Bolts straight in place (No Fitting Kit Supplied)  Available in multiple colours. Enables cold air from the grille to be sucked directly into the air feed and straight to the airbox.

Read more less

Street PRO Rear Diffuser V.1 Volkswagen Golf GTI Clubsport Mk8 Facelift FITS ONLY:Volkswagen Golf GTI Clubsport Mk8 Facelift 2024 -** Fits only with: VW-GO-8-GTI-CS-RS1G-CSO_O ** COMPLETE SET CONTAINS: §  Maxton Racing Rear Diffuser §  Mounting kitCOLOUR:-> BlackMaxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).

Read more less

LED STOP Light BMW M135i F70 FITS ONLY:BMW M135i F70 2024 -** Fits only with: BM-1-70-M-RS1GOO_OO ** COMPLETE SET CONTAINS: -> Led Stop Light COLOUR:-> Gloss BlackOffer includes only led stop light and holder. The LED light does not have the homologation to be used on public roads.The LED light can only be used for track and exhibition purposes. Stop light has two wires that must be connected to 12V brake light circuit.  

Read more less

Rear Valance BMW M135i F70 FITS ONLY:BMW M135i F70 2024 - BMW 1 M-Pack F70 2024 - COMPLETE SET CONTAINS: -> Rear DiffuserCOLOUR:-> Gloss Black This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Highlights: Increased performance (8bhp)Guaranteed for lifeComplete kit and instructions for ease of installationHand fabricated aluminium pipingAesthetically pleasing designPerfect with our inlet duct (FMINLD3)   fits:•    500•    595  - 145BHP  - Competizione 180BHP  - Trofeo 160BHP  -  Turismo 165BHP•    695  -  XSR Yamaha Limited Edition 165BHP  -  Rivale 180BHP The cold air feed is drawn in from the scuttle panel, this maximises the density charge of air entering the turbo intake. A perfect upgrade to compliment this is our Abarth specific inlet duct, FMINLD3. This combination of temperature and density gave us an 8bhp increase on our test cars as well as an incredible induction noise. It will put a smile on your face not only when you feel the power gains, but also when you open the bonnet and see this beautiful product sat in your engine bay. Our intakes/induction kits are a great and effective upgrade to your vehicle. This intake comes with a carbon fibre housing. To ensure we deliver the best quality products we can, and following the extensive design and development of our intake range, we enlist the services of one the world’s leading carbon fibre manufacturers, who’s products range from F1 aero, carbon fibre car bodies, and aircraft wings! Our intakes maximise the density charge of cold air for increased performance, as well as give a great sound, and enhance the aesthetics of your engine bay. When it comes to the filtration part of the intakes, there is no point creating such an efficient system for it then to be restricted by the OEM hose and filter. Therefore, for the filters, we engage one of our partners and experts in filtration control, Pipercross or RamAir! Additional parts such as aluminium piping are hand fabricated and polished, and the hoses are fluorosilicone for maximum longevity. This kit for the Fiat 500/595/695 comes with everything you need for the installation. It uses a high flow filter, available in either a foam (FMPK371) or pleated option (FMINDF500RCP). The aluminium components are skilfully hand fabricated in our UK headquarters. 

Read more less

A standard boot bulb not bright enough? The LED bulb just not quite cutting it? One unit just not giving you enough? This is for you! The all new Double Boot Kit with Full LED replacement Unit is here, and features a whopping 18 LED'S Per side that are all pointing in the direction that you need it! 5x Brighter than our boot bulb upgrade alone and 18x brighter than OEM, this really is Enhanced! And thats just per side! This fully replaces the OEM unit and bulb to look fully OEM once installed! This kit does require you to trim the boot plastic to create a hole for the new unit to sit. When you remove the trim, there is a cutting template on the rear of the panel to follow! Specs: Long Life Span & Fully Error Free Low Power Consumption with High Lumen Output Simple to install - Takes just Minutes after the cutting is complete 12v | 5000K White OR Choice Of Colour | Direct OEM Plug Fitment Confirmed Fitting Vehicles (May Fit Others Not Listed): MK4 Focus All Models (Including Facelift) Whats in the kit? 2x 18SMD Full Replacement Boot Units 1x Wiring Loom Extension How does this kit work? The kit uses the single plug already in place that plugs to your current boot light, the extension has a splitter at the connection end and then enough cable to route to the other side of the boot to reach the second unit, so both light units are powered off a single connection. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.

Read more less

Front Splitter V.8 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

RS Look Spoiler - Ford Fiesta ST / ST-Line Mk8 / Mk8.5 Facelift FITS ONLY: Ford Fiesta Standard Mk8 (2017-2021) REQUIRES ST / ST LINE SPOILER Ford Fiesta Standard Mk8.5 Facelift (2021-) REQUIRES ST / ST LINE SPOILER Ford Fiesta ST Mk8 2018 - 2021  Ford Fiesta ST-Line Mk8 2017 - 2021 Ford Fiesta ST Mk8.5 Facelift 2021 - 2024 Ford Fiesta ST-Line Mk8.5 Facelift 2021 - 2024 HOW THIS WORKS. You will receive the RS look section for the spoiler, which attaches to YOUR OWN original ST / ST Line spoiler.  The item arrives in primer, however will require prep, sanding, priming and painting prior to being attached to your vehicle!COMPLETE SET CONTAINS:-> Spoiler Our fiberglass products are handmade. Please understand that this could mean the product requires adjustments before beginning the installation / painting process. If the product arrives with any scuff marks it will not affect the finish, as it is unpainted, and preparation needs to be completed first. Adjustments include: - Sanding – Essential - Priming – Essential - Shaping - Possible We always recommend taking such products to a professional body shop that specialises in or is familiar with fiberglass.

Read more less

Front Splitter V.7 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Front Splitter V.6 Ford Focus ST / ST-Line Mk4 FITS ONLY:Ford Focus Hatchback ST Mk4 2019 - 2021Ford Focus Hatchback ST-Line Mk4 2018 - 2021Ford Focus Estate ST Mk4 2019 - 2021Ford Focus Estate ST-Line Mk4 2018 - 2021 COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.   We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Front Splitter V.5 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.   We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Front Splitter V.3 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.   We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Front Splitter V.2 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.   We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Front Splitter V.1 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.   We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

  As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Yaris GR owners who want to further improve the performance of their cars for track or fast road use. The DesignWe wanted to develop a manifold with an improved design to allow more flow, whilst introducing longer inlet runners to help produce more power at lower engine speed. We also wanted to incorporate a design that increased air flow balance across the three cylinders. Crucially, we were also determined to create a true direct replacement manifold that required no further modifications, such as custom fabrication or a costly aftermarket ECU. After a thorough development process that saw us simulate and test several different designs, the result is a manifold unlike any other on the market. Tested – Increased and Balanced FlowOur freer-flowing design measured an improvement in flow of 36% in comparison to the original. Furthermore, by flow testing the original manifold and using runner number two as the benchmark, our test data revealed runner number one flowed a 13% difference on average whilst runner number three flowed an 11% difference on average.In direct comparison, the same test conducted on our AIRTEC Motorsport manifold revealed a difference of just 2% on runner number one and only 4% on runner number three, therefore providing much more equal balance across the cylinders, which is crucial for safe and efficient fuelling as well as consistent power and torque. Direct Replacement Fit We also completed our secondary goal of ensuring the manifold was a true direct replacement by utilising the original throttle body and pipework. The manifold also includes moulded fixing tabs to secure the coolant lines and wiring loom, which secure in place as per the original. Lastly, the manifold allows the original rubber gaskets to transfer over for a simple and easy installation process. If you have an AIRTEC Motorsport catch can fitted, please choose from the drop down menu, as the breather fittings require different take offs.Please note: the manifold has been designed to also allow a larger 54mm throttle body to fit if preferred, but this will require additional works to the boost pipework and ECU. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black for a neat OEM+ look to improve the appearance of the engine bay. The comprehensive fitting kit includes two replacement Pro Hoses silicone, all fixtures and fittings as well as detailed installation instructions.Please note: the original engine cover will need trimming to fit or you can fit the AIRTEC Motorsport replacement engine cover.  In summary, our manifold is unique, offering unparalleled benefits, proven gains and easy installation, and all at a great value cost.   Dyno TestedThe manifold was tested on our own demonstration Yaris GR fitted with a big turbo conversion, Syvecs ECU and all associated modifications. With no changes (no mapping or increased boost) a back-to-back test revealed the fitment of the manifold alone saw power increase from 405.2bhp to 415.0bhp – an increase of nearly 10bhp with no other modifications. Response also appeared to increase lower in the rev range and with mapping to suit, further increases would likely to be seen.   Features:  36% increase in internal flow compared to original manifold Improved engine performance and throttle response Dyno testing showed increases to both power and torque Proven to distribute flow more evenly across all three cylinders True direct replacement fit that requires no additional parts No ECU/throttle body upgrade or pipework required Will also work with larger 54mm throttle body, if preferred Provisions to secure original coolant lines and wiring loom Cast aluminium construction for improved strength Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included Registered Design Right number: 6410582 AIRTEC part no: ATMSYGR23

Read more less

  As part of our expanding VW product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Polo GTI AW model. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Polo GTI AW model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the VW Polo GTI AW Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High-quality powder-coated black finish Pro Hoses silicone hoses Includes all fixtures and fittings Features detailed fitting guide Registered Design Right number: Application Pending  AIRTEC part no: ATMSVAG19

Read more less

Street PRO Front Splitter V.2 Volkswagen Golf GTI / GTE / R-Line Mk8 Facelift FITS ONLY:Volkswagen Golf GTI Mk8 Facelift 2024 -Volkswagen Golf GTE Mk8 Facelift 2024 -Volkswagen Golf R-Line Mk8 Facelift 2024 -** Fits only with: VW-GO-8F-GTI-FD2G ** COMPLETE SET CONTAINS: §  Maxton Racing Front Splitter §  Mounting kit Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less